I am using ZPL to general a label for jewellery. I am trying to produce a barcode (likely Code 128) which would be smaller than 10mm x 8mm.
The best I can do is about twice the width:
^CF0,30
^FO48,94
^A0N,20,20
^BY1,3
^BCN,40
^FD12345678^FS
Any advice?
Regards,
Darcy
1 Replies
Hi Darcy, Which printer and DPI are you using? I would recommend a 300DPI or even 600DPI printer for printing that small. I'm not sure the standard 200DPI (8dots per mm) is capable of printing that small.