Hi all,
I have a customer that wants to test the DS457 with a photeye to trigger the sacnner. We don't have here our dedicate cable to that so I need two information:
1 - The diagram of the cable 25-58925-02R
2 - What kind of sensor could us put in our scanner ? Is it a simple dry contact our we need a electronic signal (NPN, PNP, TTL)?
I will have to make the demonstration tomorrow so if anybody could help me It will be great.
Thank you
Levi
DS457 with external trigger// Expert user has replied. |
2 Replies
Levi,
I don't have the actual cable drawing, but with the pin-out info from the integration guide you should be able to make a cable. The trigger signal (pin1) only requires to pulled to ground (pin5) for the scanner to trigger, no "signal" is needed.
Best regards
Benny
Hi Benny,
Thank you a lot.
Best Regards
Levi