Hi,
I want to print a GS1 Barcode (formerly EAN128) with an EPL Zebra.
I have 2 input numbers with various qualifier and variable length:
(241) customer part number
(10) batch
I got the information from zebra that the separator character is a "-" .
So I did it that way:
B750,350,2,1E,2,0,96,N,"241MATNR-10Batch"
Every barcode testing tool said:
241CUST. PART NO: "000xxxxx-10xxxxxxx"
Just one big cust. part number
So I think the seperator is not correct.
I also tried the following which didn't work:
"(241)000xxxxx(10)xxxxxxx"
">8241000xxxxx>810xxxxxxx"
"241000xxxxx“FN1“xxxxxxx"
Thanks for your help.
EPL -> Barcode GS1/EAN128 |
7 Replies
Hi Kandarp,
Can you give me a picture of your barcode that I can check it?
Thanks
hI
I have printed through below varibales
B650,307,2,1E,2,6,160,N,
with 4x4 label size it is printing and scanning also please check
Hi,
I changed my label to B650,307,2,1E,2,6,160,N,
Now the barcode is bigger but it is still not GS1 compliant because I have one big 241 segment and not a 241 and a 10 segment.
Br
Hi
Can you try to make variables as same as your Script file
Like B750,350,2,1E,2,0,96,N,
and then take print and see
Thanks again but the barcode is still not readable.
BR
Hi
can you try with this
if this gives proper output the separator is different
Hi Kandarp,
Thanks for your reply.
I was able to print your file but it was not readable (tried with a hardware scanner and with barcode test tools).
Br